> Link Dwa
> D-link Dwa-160 Linux
D-link Dwa-160 Linux
PCI Model Chipset Driver Works "out of the box" Comments Last Updated DWA-642 Atheros AR5416 ndiswrapper or madwifi No To get this card to work, follow the following tutorial: http://ubuntu-virginia.ubuntuforums.org/showthread.php?p=5890620#post5890620. 4 Selecting previously unselected package firmware-ralink. WEP functions however WPA is not reliable. 2009-06-22 Unknown Model Chipset Driver Works "out of the box" Comments Last Updated DWL-520 E1 ? Is that cool? Source
Did not test 22Mb/sec mode DWL-G650 Atheros AR5212 Madwifi Yes Only Open-Key WEP with Netgear DG834G ? No Works on 10.10 and 11.04 with rt2870sta (might need rt2800usb blacklisted). 2011-05-08 DWL-G132/A3 2001:3a03 ndiswrapper No Works with ndiswrapper and WinXP driver from manufacturer's website. I tried plugging in my DWA-160 in a USB port anyway, it didn't even blink. B « Reply #5 on: June 27, 2009, 03:38:17 AM » sorry for the noobness, but what's the advantage of one over the other?
D-link Dwa-160 Linux
Why does it take so long to develop modern military jets? WEP not yet supported for acx111 cards. list Contact admin Tools What links here Related changes Special pages Printable version Permanent link Page information Browse properties This page was last modified on 24 August 2014, at 15:34. I have to start with 3.10 in order for the wireless adapter to work.
- I remember that there was a discussion regarding revision b and a and as I recall the revision b was the Atheros model.
- It's normal.Even with the LED off, you should get a complete WAN connexion.(thanks to Mark Mason for the info :-) Your wifi adpater DWA-160 should now be available in the Network
- B « Reply #3 on: June 24, 2009, 09:42:45 PM » What's the difference mine says A1, should I have looked for a rev b?
Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-3.10-0.bpo.2-686-pae Found initrd image: /boot/initrd.img-3.10-0.bpo.2-686-pae Found linux image: /boot/vmlinuz-3.2.0-4-686-pae Found initrd image: /boot/initrd.img-3.2.0-4-686-pae done Setting up firmware-linux-free (3.2) ... Back to top GénéalogieLinuxAndroidNAS & coMisc Partners Support Community Ubuntu.com Ubuntu Documentation Official Documentation Community Help Wiki Contribute Page HistoryLogin to edit HardwareSupportComponentsWirelessNetworkCardsDlink Parent: Wifi Wireless Cards Supported | Discuss This card needs firmware loaded in order to work. I then used the apt-get command to get a different Linux image and the firmware/driver I needed.
It should look like this: [code]06:00.0 Network controller: Ralink corp. This will help to eliminate the "driver" interference that can happen.Also, the rev.B adapters are newer tech than the rev.A model. B « Reply #2 on: June 11, 2009, 12:22:23 PM » There is no "different" in the D-Link "product" code or UPC code? http://forums.dlink.com/index.php?topic=5920.0 It might explain why I didn't see it flash.
D Link Dwa 160 Driver Windows 7 Download
Check: ls /lib/firmware | grep carl You should find carl9170-1.fw and carl9170fw. http://www.dslreports.com/forum/r22914635-DWA-160-Rev-B-With-RALINK-driver Logged smlunatick Level 5 Member Posts: 626 Re: How to tell if DWA-160 adapter is rev. D-link Dwa-160 Linux Done The following extra packages will be installed: firmware-linux-free initramfs-tools Suggested packages: linux-doc-3.10 debian-kernel-handbook The following NEW packages will be installed: firmware-linux-free firmware-linux-nonfree firmware-ralink linux-image-3.10-0.bpo.2-686-pae The following packages will be upgraded: Dlink sudo iwlist wlan0 scan If not, look for other problems in the message logs: dmesg | grep carl rfkill list all share|improve this answer answered Jul 13 '13 at 12:30 chili555
I just installed the Ubuntu 12.04 LTS. http://bestmatchcomputers.com/link-dwa/d-link-dwa-547.html Yes Automatically detected with Feisty; worked after config and reboot 2007-10-02 WNA-2330 Atheros AR5212 v: A1 Madwifi Yes Worked immediately. up vote 0 down vote favorite I just bought a D-Link DWA-160 revision B2. What's With The $199.99 Activation Fee? [CharterSpectrum] by CBLMorphis392.
D-Link seem to also have stopped any driver updates for this adapter.Rev. To find out if this module is loaded you can use the lsmod command. It will shows which loadable kernel modules (LKM) are currently loaded. have a peek here Here are the results : Type of network Speed 54G WEP 1 Mb/s 802.11N Open 3.9 Mb/s 802.11N WPA2 (AES) 3.7 Mb/s CPL 200 3 Mb/s We can say that there
By using the Ralink RT2870 drivers, you can have a more recent driver. Plug in the device into a USB port, and then use the lsusb command to locate the VID (vendor id) and PID (product id) of this device. This article explains all the steps needed to achieve this goal.
Done Preconfiguring packages ... (Reading database ... 129893 files and directories currently installed.) Preparing to replace initramfs-tools 0.109.1 (using .../initramfs-tools_0.113~bpo70+1_all.deb) ...
apt-get -t wheezy-backports install linux-image-3.10-0.bpo.2-686-pae firmware-linux-nonfree firmware-ralink My kernel version at that moment was 3.2.0-4-686-pae. Unpacking replacement initramfs-tools ... Latest error is also normal, as the makefile tries to copy one file in a root folder. The fault seems to be related to an error in loading the firmware which is present in the hotplug firmware folder.
If it's not loaded then you probably need to apt-get it. Don't ask why it's not called RT5572STA ... So can someone please help me follow this guide by providing more digestible and understandable instructions? http://bestmatchcomputers.com/link-dwa/d-link-dwa-140.html update-initramfs: deferring update (trigger activated) Setting up firmware-ralink (0.39~bpo70+1) ...
Time for conquered countries to accept a new religion Why is ammonium chloride rather than an alkylammonium chloride salt the product of nucleophilic substitution of a chloroalkane by ammonia? acx100 No Work quite well with latest driver from Davis Vlasenko (0.3.10 works well). 2005-09-22 WNA-1330 Atheros AR5212 Madwifi Yes Just had to configure my wi-fi connection and WEP and was